Selecting a Grounding Gland: CG EMC2 vs. CG EMC-4
EMC-2
- → Optimal grounding of shielded cable
- → One direction installation
- → Impact resistant
- → Suitable for the highest demands of today's technology
- → Easy installation
- → Easy handling
- → High corrosion resistance
- → Water tight
- → Strain relief
EMC-4
- → Optimal grounding of shielded cable
- → Bi-directional installation
- → Impact resistant
- → Free radial and axial movement of the cable without any damage to the braid
- → Easy installation
- → Large contact surface of the finters allowing low contact resistance
- → High contact performance under vibrating conditions
- → Water tight
- → Strain relief
Filter Cord Grip Selection
| P/N | Type | Thread | Thread | Thread Type (male) | Thread Type (female) | Material | Color | Clamping Range (in) | Clamping Range (mm) | Locknut P/N | Outer Ø (inch) | Outer Ø (mm) | Inner Ø (inch) | Inner Ø (mm) | Shape | Average Air Flow (l/h) | Water Intrusion Pressure Bar | Fits SAB Plastic Cord Grips | Number of Holes | Hole Diameter | Product Datasheet | In Stock | Additional data | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
EP4-48 |
PG 48
|
PG
|
Nickel Plated Brass
|
1.339 - 1.732
|
34.0 - 44.0
|
LPE-48 (Locknuts need to be purchased separately)
|
 |
|
||||||||||||||||||
|
EN2-3/4R |
NPT 3/4"
|
NPT
|
Nickel Plated Brass
|
0.354 - 0.630
|
9.0 - 16.0
|
LNE-3/4 (Locknuts need to be purchased separately)
|
|
|
||||||||||||||||||
|
EN4-1/2C-2 |
NPT 1/2"
|
NPT
|
Nickel Plated Brass
|
0.295 - 0.551
|
7.5 - 14.0
|
LNE-1/2 (Locknuts need to be purchased separately)
|
|
|
||||||||||||||||||
|
VFD GRD KIT 1 to 4/0 |
 |
|
|
|||||||||||||||||||||||
|
VFD GRD KIT 250- 500 |
|
|